Huawei SmartAX MA5801-GP08-H3

Huawei SmartAX MA5801-GP08-H3 is 1U height box-shaped OLT with 8*GPON ports, 4*10GE/GE upstream ports.AC/DC power supply

SmartAX MA5801 is a compact OLT in a 1U box. It offers several fiber-to-the-home (FTTH) solutions to meet the requirements for cost-effective and efficient networking. There are 8 GPON ports, 4 of which are equipped with C+ SFP and 4 10G uplinks for up to 1024 FTTH users. System switching capacity: 110 Gbit/s;Support 32768 MAC address, 16384 ARP table.

MA5801-GP08-H3 Appearance and Structure
It houses integrated control and service module, 1 pluggable fan module and 2 pluggable power modules. Its mounting ears are applicable to IEC specifications and ETSI specifications, and are used in racks or cabinets of different specifications.

MA5801-GP08-H3

Item Specification
System switching capacity 110 Gbit/s
MAC addresses 32768
Access ONT 1024
IPv4 routing table 8192
IPv6 routing table 4096
ARP table 16384
Bit error rate (BER) in full load A BER smaller than 10 e-10 for a port that transmits data in full load
Upstream ports 4 GE/10GE
Service ports 8 GPON
Layer 2 features
VLAN+MAC forwarding SVLAN+CVLAN forwarding
PPPoE+ DHCP option82
Layer 3 features
Static route RIP/RIPng
OSPF/OSPFv3 IS-IS
BGP/BGP4+ ARP
DHCP relay VRF
Multicast
IGMP v2/v3 IGMP Proxy/Snooping
MLD v1/v2 MLD Proxy/Snooping
VLAN-based IPTV multicast IPv4 PIM and PIM-SSM
QoS
Traffic classification Priority processing
trTCM-based traffic policing WRED
Traffic shaping HQoS
PQ/WRR/PQ+WRR ACL
IPv6
IPv4/IPv6 dual stack IPv6 L2 and L3 forwarding
DHCPv6 relay
System reliability
GPON Type B/Type C protection ERPS (G.8032)
2 power boards for redundancy protection In-service board fault detection and rectification
Aggregation
Aggregation management
System reliability specifications System availability for the typical configuration: > 99.999%
Mean time between failures (MTBF): about 61 years
NOTE:
Due to different network environments and different boards used by devices, the preceding MTBF (61 years) of the MA5801 is only for reference. The preceding values are only for reference. For details, contact the related Huawei engineers.
Power consumption DC power supply:
Static power consumption: 46W
Typical power consumption: 64W
Maximum power consumption: 111W
AC power supply:
Static power consumption: 47W
Typical power consumption: 65W
Maximum power consumption: 112W
NOTE:
The power consumption of a product is tested in the following conditions:
Static power consumption: 25°C, no optical module in optical ports, and no service.
Typical power consumption: 25°C, 4 x 10GE(10kM) upstream ports, 8 x GPON(CLASS C+) ports on the user side, full services, and maximum traffic.
Maximum power consumption: 65°C, 4 x 10GE(10kM) upstream ports, 8 x GPON(CLASS C+) ports on the user side, full services, and maximum traffic.
Dimensions (W x D x H) (mm) Excluding mounting ears: 442 x 220 x 43.6
Including IEC mounting ears: 482.6 x 220 x 43.6
Including ETSI mounting ears: 531 x 220 x 43.6
Maximum fully-loaded weight 5 kg
Power supply mode DC power supply (dual backup)
AC power supply (dual backup)
Working voltage range DC power supply: –38.4 V to –72 V
AC power supply: 100 V to 240 V
Rated voltage DC power supply: –48 V/–60 V
AC power supply: 110 V/220 V
Maximum input current DC power supply: 6 A
AC power supply: 2.5 A
Ambient temperature –40°C to +65°C
The device can start up at a lowest temperature of –25°C.
NOTE:
The +65°C temperature refers to the highest temperature measured at the air intake vent of a service subrack.
Ambient humidity 5%–95% RH
Atmospheric pressure 70–106 kPa
Altitude < 4000 m. The air density varies with the altitude and will affect the heat dissipation of a device. Therefore, the working environment temperature of the device varies with the altitude.

Reviews

There are no reviews yet.

Be the first to review “Huawei SmartAX MA5801-GP08-H3”

Your email address will not be published. Required fields are marked *

RELATED PRODUCTS