H801SCUH Control Board
Huawei SCUH is the MA5683T MA5680T super main control board integrated with 4-port 10GE/GE optical uplink port.
Huawei SCUH Control Board is a super control unit board for Huawei MA5683T MA5680T, which is the core of system control and service switching aggregation.
| Board | H801SCUH |
| Panel ports | 4 GE/10GE ports, Supporting automatic switching for remote software commissioning using GE upstream transmission. |
| Channel to the service board | 16 10GE/20GE channels |
| Channel to the GIU board | Providing two 10GE channels for each upstream boards |
| Channel to the standby control board | Providing two 20GE channels for load sharing with the standby H801SCUH board |
| Access Service | Optical and copper |
| Daughter Board | No |
| Load sharing | Yes |
| Ethernet synchronization | Yes |
| Temperature querying and high temperature alarming | Yes |
| Built-in 2GB CF card | Yes |
| Centric Management for GE Remote Extended Subracks | No |
| D-CMTS | No |
Huawei SCUH Control Board Product Features:
- SCU Boards Comparison
- All SCU boards support the functions as below:
- System control and management unit
- Active/standby switchover
- Local and remote maintenance through maintenance serial port CON or maintenance Ethernet port ETH
- Environmental monitoring through environment monitoring serial port ESC
Compare Huawei SCUH Control Board and other Boards:
| Board Name | Interface Port | Internal Port | ||
| The channel to the service board | The channel to the upstream board | The channel to the standby main control board | ||
| H801SCUK | 4 GE | 16 GE/10GE | 2 GE/10GE per uplink board | Two 10GEs, load balancing with standby Huawei H801SCUK (supported by V800R011C00 and above) |
| H801SCUL | NA | 16 GE/10GE | Two GE/10GEs are used for *** slots on the upstream board. | |
| Two GE/10GEs are used in the uplink slot on the second slot. One GE/10GE is multiplexed with the subboard. The GE/10GE is selected by the electronic switch to be used on the upstream board or the subboard. | ||||
| H801SCUN | 4 GE | 16 GE/10GE | 2 GE/10GE per uplink board | Two 10GEs, load sharing with the standby H801SCUN (supported by V800R011C00 and above) |
| H802SCUN | 4 GE | 16 GE/10GE | 2 GE/10GE per uplink board | Two 10GEs, load balancing with the standby H802SCUN (supported by V800R011C00 and above) |
| H801SCUH | 4 GE/10GE | 16 10GE/20GE | 2 10GE per uplink board | 2 20GE, load sharing with standby H801SCUH |
| In the scenario of GE uplink-free soft-switching, the port supports automatic switching. | ||||
| H801SCUV | 4 GE/10GE | 16 10GE/20GE | 2 10GE per uplink board | 2 20GE, load sharing with standby |
Reviews
There are no reviews yet.