Huawei OptiX OSN 1800V AC
Huawei OSN 1800V AC Assembly Chassis, 12 Service Slots, Equipped with 2xTNF6APIU AC Power Module, without Service Board TNFK17AFB.
An OSN 1800 V chassis can be AC or DC powered. The DC powered chassis uses the PIU board and the AC powered chassis uses the APIU board. In the AC powered chassis, the APIU board occupies two slots.
Slot layout of the chassis (AC powered):
Highlights of OSN 1800 V Packet Enhanced
-
MS-OTN compliance and compact design (5 U high), supporting access of Any-rate services
- A single chassis supports full-granularity cross-connections and multiplexing (only Z-series cross-connections support ODU3). It allows for a maximum of 700 Gbit/s OTN capacity, 700 Gbit/s packet capacity, 280 Gbit/s SDH higher-order and 40 Gbit/s SDH lower-order capacities, and supports ODUk (k = 0, 1, 2, 2e, 3, 4, C2, flex). This significantly improves line bandwidth usage.
- The 1800 V supports universal line boards, allowing services after being scheduled on the OTN, SDH, PKT service planes to hitlessly share line transmission bandwidth.
- Being highly integrated, each 1800 V chassis is 5 U high and provides a maximum of 15 service slots.
- Targeted for metro edge applications, the 1800 V can be deployed as a service access or aggregation node, and supports uniform of full services (1.5 Mbit/s to 100 Gbit/s).
-
Environment friendly, power saving, and easy to deploy and maintain
- Supports power saving and consumes low power in a typical configuration, reducing OPEX for customers.
- Easy to deploy, supports installation in a 19-inch or ETSI cabinet and AC and DC power supplies.
- Supports OTN inband management compliant with ITU-T G.709.
-
Distinguished architecture, high reliability, and secure data transmission
- Provides various network-level protection schemes for all-around service protection.
- Provides equipment-level protection: power supply protection, fan protection, and 1+1 protection for system control, cross-connect, and clock integrated boards.
-
Built-in pulse code modulation (PCM) provides an all-in-one solution to satisfy enterprise customers’ requirements on low-speed service access. Built-in PCM has the following features:
- Reduces types of devices, delayering the network.
- Operates on a universal transmission platform, facilitating network expansion and evolution.
- Supports fast fault locating using the unified NMS.
Tech Specs:
| Specification | ||
| Number of slots for service board | DC-powered chassis: 15 AC-powered chassis: 12 |
|
| Optical switching capability | 1 to 9-degree ROADM | |
| Electrical switching capacity | OTN | 700 Gbit/s |
| Packet service | 700 Gbit/s | |
| TDM | Higher order: 280 Gbit/s; lower order: 40 Gbit/s |
|
| Maximum number of wavelengths | DWDM | 80 wavelengths |
| CWDM | 8 wavelengths | |
| Center wavelength range | DWDM: 1529.16 nm to 1560.61 nm (C Band, ITU-T G.694.1) CWDM: 1471 nm to 1611 nm (S+C+L Band, ITU-T G.694.2) |
|
| Service types | SDH/SONET service, PDH service, OTN service, Ethernet service, PCM service, CPRI service, OBSAI service, SAN service, video service, and others |
|
| Max Rate per Channel | 200Gbit/s | |
| Line rate | 2.5 Gbit/s, 10Gbit/s, 50Gbit/s, 100 Gbit/s, 200Gbit/s | |
| Maximum total of OSN 810 and OSN 850 devices managed by each OSN 1800 NE | 50 NOTE: The quantity depends on the number of C12X5&C15Xn boards and the boards interconnected with the OSN 850 devices which are inserted in the OSN 1800 NE |
|
| Pluggable optical/electrical | Optical module: SFP/eSFP, XFP, SFP+, QSFP+, TXFP, CFP, CFP2, QSFP28 Electrical module: GE SFP, FE SFP, STM-1 SFP |
|
| Topology | Point-to-point, chain, star,ring, ring-with-chain, intersecting rings, tangent rings, and mesh networking | |
| Network level protection (OTN) | Client 1+1 protection, intra-board 1+1 protection, ODUk SNCP, optical line protection, tributary SNCP, and LPT | |
| Network level protection (packet) | Tunnel APS, PW APS/FPS, MC-PW APS, MC-LAG, LPT, LAG, ERPS, MRPS, LMSP, packet SNCP | |
| Network level protection (TDM) | SDH protection: SNCP, linear MSP, ring MSP, TPS, SNCTP EoS protection: LAG, DLAG,LCAS, LPT, BPS, and STP/RSTP PCM protection: E1 SNCP, 64K SNCP, Hitless protection switching |
|
| Equipment level protection | Control, cross-connect, and clock integrated board redundancy Power supply redundancy Fan redundanc |
|
| Optical power management | ALS, AGC, OPA, IPA | |
| Maintenance | MPLS-TP OAM ETH OAM Port mirroring Port traffic mirroring (packet) Loopback PRBS LLDP |
|
| Easy O&M | Optical Doctor System, Fiber Doctor System | |
| Synchronization | Physical Clocks (OTN & Packet & SDH) IEEE 1588v2 (OTN & Packet) ITU-T G.8275.1/G.8273.2 (OTN & Packet) |
|
| ASON | OTN network: Electrical-Layer ASON and Optical-Layer ASON (only Z-series cross-connections support). OCS network: SDH ASON (Z5UXCMS, Z5XCS) OCS network: 2M ASON (Z5UXCM, Z5XCS) |
|
| Power supply | DC power input Standard working voltage:-48V to -60V Working voltage range: -40V to -72V AC power input Standard working voltage: 100V AC to 120V AC, and 200V AC to 240V AC |
|
| Mechanical Specification | ||
| Dimensions (H x D x W, mm) | 221 mm x 220 mm x 442 mm (excluding the handle) | |
Reviews
There are no reviews yet.