Huawei NE8000 M8 2*AC
HUAWEI NE8000 M8 with 2*IPU-480+2*AC
Huawei NetEngine 8000 M8 all-scenario access and aggregation routers are intelligent high-end routers designed for the industry market. Primarily intended for scenarios such as access and aggregation, private line, data center egress, and data center interconnection, these routers provide a simplified and intelligent IP bearer network solution featuring simplified architecture, smart connection, and committed high availability.
Tech Specs:
| Item | Description |
| Switching Capacity | 960Gbit/s |
| Forwarding Performance | 405 Mpps |
| Number of Slots | 6 slots |
| Interface Types | 100GE/50E/40GE/25GE/10GE/GE/FE/E1/Channelized STM-1c/OC3c/STM-1c |
| Layer 2 Ethernet protocols | G.8032, STP/RSTP, MSTP, BPDU, and LACP Transparent transmission of Layer 2 protocols |
| Ethernet service | VLAN, Bridge domain |
| Routing | RIP, RIPng, OSPF, OSPFV3, IS-IS, IS-ISV6, BGP, BGPv6, Static routing, IPv4 Multicast, IPv6 Multicast, Multicast static, etc |
| IPv4 | TCP/IP, for example, ICMP, IP, TCP, UDP, Socket (TCP/UDP/RAW IP), ARP Static DNS DNS Client FTP Server FTP Client TFTP Client DHCP Relay 和 DHCP Server Ping Tracert NQA IP policy-based routing Forwarding next hop based on traffic IP policy-based route load balancing The QinQ interface (QinQ termination and dot1q termination) supports IPv4 load balancing. Enabling and disabling the rapid ping reply function based on interface boards Forcible fragmentation for packets with length greater than MTU and DF enabled MPLS-in-UDP tunnel egress |
| IPv6 | IPv6(ND) Path MTU (PMTU) TCP6 Ping IPv6 Tracert IPv6 Socket IPv6 DHCPv6 Relay Static IPv6 DNS TFTP IPv6 Client IP policy-based routing IPv6 ND fast reply |
| L2VPN | PWE3/VLL、VPLS、EVPN、EVPN L3VPN、VxLAN |
| L3VPN | CE routers can access the L3VPN through L3 interfaces. Support static routes between CE and PE, BGP, RIP, OSPF and ISIS Inter-AS VPN, including RFC2547bis option A Inter-AS VPN, including RFC2547bis option B Inter-AS VPN, including RFC2547bis option C NG-MVPN IPv6 VPN HoVPN Seamless MPLS BGP LSP entropy label Redirect to VPN L3VPN PIPE/Uniform mode L3VPN Statistics |
| SRv6 | SRv6-BE、SRv6-TE Policy、SRv6 egress protection |
| Clock | Physical layer synchronization and 1588v2 |
| OAM | iFIT IPFPM NQA TWAMP BFD MPLS OAM MPLS-TP OAM VRRP Ethernet OAM 802.3ah Y1731 Ethernet LPT Bit-error-triggered protection switching |
| QoS | QPPB，Differ-Serv，HQoS，Redirection |
| Typical power consumption(W) | 457.79 |
| Typical heat dissipation | 1443.77 BTU/hour |
| AC input voltage | Input voltage range: 90 V to 290 V
Input rated voltage: 200 V to 240 V/100 V to 127 V dual live wires, 240 V HVDC supported |
| MTBF | 101.78 years |
| MTTR | 0.5 hours |
| Availability | 0.999999439 |
| Redundant IPUs | 1:1 |
| Redundant fans | 1+1. The device can work properly for a short time at 40ºC (104°F) if a single fan fails (one fan module contains two fans). |
| Redundant power supply | 1+1 |
| Operating temperature | Long-term: AC: –20°C to +55°C (–4°F to +131°F)
Temperature change rate limit: 30°C/hour |
| Relative operating humidity | Long term: 5% to 85% RH, non-condensing
Short term: 5% to 95% RH, non-condensing |
| Relative storage humidity | 5% to 95% RH, non-condensing |
| Dimensions(mm) | 132.6 (H) x 442 (W) x 220(D) |
| Base Configuration Weight (Kg) | 4.3 |
| Full Configuration Weight(kg) | 17.1 |
Reviews
There are no reviews yet.